Skip to content

Apm 2.8 + Neo-M8N GPS + 3DR Radio Telemetry Kit


2 Optional Version, APM 2.8 bulit-in / Without Compass. Please choose what you ask for.

---- with box without damper! For the detail of connection and programming, please contact me directly for this.

Size: 70 * 45 * 13.5

Weight: 28G

APM flight control is an open source, you can play APM well depend on individual ability. The player must have the basic understanding ability of monolithic integrated circuit, c-language, electrical, mechanical knowledge, and also need a certain degree of mental ability, financialand material resources, energy support. If you are not ready, then we recommend that you prepare some introductory information first.


  • Eliminate the Old Version 1.0mm 6 P SM06B V2.52 GPS interface, changed to the DF13-4P compass I2C external interface, put the DF13-5P GPS interface with external compass interfaces, more convenient for GPS connections with external compass.
  • Has replaced the V2.52 I2C interface interfaces for multi-purpose MUX, which can be used by the users themselves through the Cushion Turntable freely configurable output function, UART0, UART2, I2C, OSD optional, OSD interface standards, avoiding 2.52 Version when you want to use both Data Transmission and OSD, you need to use Y-line separating the program interface. Improvement of the OSD interface when used in conjunction with Data Transmission, because of the insulation resistance, more effective to avoid Data Transmission interference.
  • New use United States semi-LP2985-3.3 V2.8.0, pressure-resistant up to 16 V, increased reliability, reduced probability of bad health problems due to voltage.


-Arduino Compatible!

-It can be ordered with top-pin pins to attach connectors vertically, or as side-entry pins to slide your connectors on both ends horizontally

-includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer

-Onboard 4 MegaByte Dataflash chips for automatic data logging

-optional GPS off-board, uBlox LEA-6H module with Compass.

- one of the first open source autopilot systems to use Invensense 6 DoF Accelerometer / Gyro MPU-6000.

- barometric pressure sensor updated for MS5611-01BA03, from Measurement Specialties.

-Atmel ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively。


- Receiver type 72-channel u-blox M8 engine



- Galileo-ready E1B/C (NEO-M8N)

- Nav. update rate1 Single GNSS: up to 18 HZ

- Concurrent GNSS: up to 10 Hz

- Position accuracy2 2.0 m CEP

- Acquisition2 Cold starts: 26 s

- Aided starts: 2 s

- Reacquisition: 1.5 s

- Sensitivity2 Tracking & Nav: -167 dBm

- Cold starts: -148 dBm

- Hot starts: -156 dBm

- Assistance AssistNow GNSS Online

- AssistNow GNSS Offline (up to 35 days)3

- AssistNow Autonomous (up to 6 days)

- OMA SUPL & 3GPP compliant

- Oscillator TCXO (NEO-M8N/Q),

- Crystal (NEO-M8M)

- RTC crystal Built-In

- Noise figure On-chip LNA (NEO-M8M). Extra LNA for

- lowest noise figure (NEO-M8N/Q)

- Anti jamming Active CW detection and removal. Extra

- onboard SAW band pass filter (NEO-M8N/Q)

- Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)

- Supported antennas Active and passive

- Odometer Travelled distance

- Data-logger For position, velocity, and time (NEO-M8N)

- Operating temp. -40° C to 85° C

- Storage temp. -40° C to 85° C (NEO-M8N/Q)

- -40° C to 105° C (NEO-M8M)

- RoHS compliant (lead-free)

- Qualification according to ISO 16750

- Manufactured and fully tested in ISO/TS 16949 certified production sites

- Uses u-blox M8 chips qualified according to AEC-Q100

- Supply voltage 1.65 V to 3.6 V (NEO-M8M)

- 2.7 V to 3.6 V (NEO-M8N/Q)

- Power consumption4 23 mA @ 3.0 V (continuous)

- 5 mA @ 3.0 V Power Save Mode

- (1 Hz, GPS mode only)

- Backup Supply 1.4 to 3.6 V

- NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,

- TCXO, flash, SAW, LNA,

- Timepulse Configurable 0.25 Hz to 10 MHz

 3DR Telemetry Kit 915 Mhz Specifications:

- Very small size

- Light weight (under 4 grams without antenna)

- 915MHz

- Receiver sensitivity to -121 dBm

- Transmit power up to 20dBm (100mW)

- Transparent serial link

- Air data rates up to 250kbps

- MAVLink protocol framing and status reporting

- Frequency hopping spread spectrum (FHSS)

- Adaptive time division multiplexing (TDM)

- Support for LBT and AFA

- Configurable duty cycle

- Built in error correcting code (can correct up to 25% data bit errors)

- Demonstrated range of several kilometers with a small omni antenna

- Can be used with a bi-directional amplifier for even more range

- Open source firmware

- AT commands for radio configuration

- RT commands for rem


  • Use: Vehicles & Remote Control Toys
  • Remote Control Peripherals/Devices: Remote Controller
  • Material: Composite Material
  • Upgrade Parts/Accessories: Frame
  • Technical parameters: Value 2
  • RC Parts & Accs: Antennas
  • Brand Name: LHI
  • For Vehicle Type: Airplanes
  • Four-wheel Drive Attributes: Assemblage
  • Model Number: APM2.8
  • Tool Supplies: Assembled class