e7086TM3 5.8G 48CH VTX
$16.99
New Arrival EWRF e7086TM3 5.8G 48CH 25mW 200mW 600mW Switchable FPV Transmitter For OSD Configuring FPV Racing Drone RC Toys
Description :
- Size : 32.5*22.6*7.25mm
- Working Voltage : DC6-24V
- Working Current : 130mA(25mW)/230mA(200mW)/280mA(600mW)/12V
- Working Frequency : 5.8G
- Working Channel : 48CH
- Transmit Power : 25mW/200mW/600mW/Turn OFF adjustable
- Transmit Distance : 200m(25mW)/1.5km(200mW)/5km(600mW), in open area with 4-leaf clover antenna
- 1*RP-SMA ANT Connector
- 1*7P Socket (Video-in,GND,PMW-IN,Audio-in,5V-out,GND,Video-in)
- 1*Displayer
- 2*Button
- Support parameter adjusted by Betaflight,fligth controller,OSD
- 25mW/200mW/600mW and Turn-off (PITMODE) switchable
- 5V BEC output, support power for receiver and camera
- 0% inteference when power on and swtich channel, definitely won't intefere others
- With overheating auto protection, to prevent damge
- With protective function that will not damage when forget to connect the antenna.
- Support OSD configuring channel, power level and PITMODE mode switch
- Support PMW channel switch and PITMODE switch
- Can save the power setting
- Can lead out buttons to adjust the parameter out of the module
- Mini Nixie tube displayer
Operation :
- Power Switch
- Power on, power setting is same as last time you used.
- Long press Power Button, switch among 25mW,200mW and 600mW circularly
- Short press Power Button twice, turn on or turn off transmitting. "TX" indicator on is tranmitting, off is turon off(regardless of the other 2 LED)
- 25mW works : "TX"on; 200mW works : "TX""200mW" 2 indicators on; 600mW works : 3 indicators all on
- Channel Switch :
- Long press Channel Botton, switch among A-B-C-D-E-F circularly, short press to switch CH1-CH8 circularly
- When connect PMW, there is signal in 3 seconds, the decimal point on displayer is lighting, you can use the remote control transmitter to configure 1-8 channels and turn off the transmitter; Otherwise, it will enter the button configuring mode aftger 3 seconds, the decimal points won't show up.
- Can lead out the configuring button for setting, there is bonding pad for button on module.
- Had better connect the antenna before you power on it, can pretect the module.
- 2. 5V voltage input, the max current is 1A.
- 1 x 5.8G 48CH 25mW/200mW/600mW FPV Transmitter
- Use: Vehicles & Remote Control Toys
- Remote Control Peripherals/Devices: Receivers
- Material: Composite Material
- Upgrade Parts/Accessories: Frame
- RC Parts & Accs: Antennas
- For Vehicle Type: Airplanes
- Four-wheel Drive Attributes: Assemblage
- Model Number: Transmission
- Tool Supplies: Assembled class
- Brand Name: LHI
- Technical parameters: Value 10